• Sales Enquiries: 0508 367 769

HP Parts

Power module - Input voltage 100-240VAC, 50-60Hz - Output voltage 32VDC, 1.56mA, 50 watt - Requires separate AC power cord (Worldwide)

1000 watt AC hot-plug power supply - Installs in the computer chassis as primary or redundant supply (800 watts at 100VAC to 1000 watts at 200VAC maximum power) - Requires 100-240VAC at 50/60Hz


Battery (Primary) - 6-cell lithium-ion (Li-Ion), 14.4VDC, 5.1Ah

1TB hot-plug SATA hard disk drive - 7,200 RPM, 3Gb/sec transfer rate, Native Command Queuing (NCQ), 3.5-inch large form factor (LFF), Midline


500GB hot-plug SATA hard disk drive - 7,200 RPM, 3Gb/sec transfer rate, Native Command Queuing (NCQ), 3.5-inch large form factor (LFF), Midline


1.0TB hot-swap dual-port Serial Attached SCSI (SAS) hard disk drive - 7,200 RPM, 3.5-inch Large Form Factor (LFF)

Battery pack (Primary) - 6-cell lithium-ion (Li-Ion), 2.2Ah, 47Wh


Battery (Primary) - 6-cell lithium-ion (Li-Ion), 14.4VDC, 2.55Ah, 55Wh


Keyboard assembly - 31.20mm (12.28in) keyboard with embedded numeric keypad (United States)

146.0GB hot-plug Serial Attached SCSI (SAS) hard drive - 15,000RPM, 3.5-inch form factor (Part of 384854-B21)

Battery (Primary) - 8-cell lithium-ion (Li-Ion), 63Wh

Battery (Primary) - 8-cell lithium-ion (Li-Ion), 2.55Ah, 73Wh

16GB, DIMM, DDR3-106, PC3-8500R memory module - (512MB x 4)

146GB hot-plug dual-port SAS hard disk drive - 10,000 RPM, 6Gb/sec transfer rate, 2.5-inch small form factor (SFF), Enterprise


300GB hot-plug dual-port SAS hard disk drive - 10,000 RPM, 6Gb/sec transfer rate, 2.5-inch small form factor (SFF), Enterprise


Power supply (240 Watt) - Has 89% efficient rating, wide-ranging, Active Power Factor Correction technology - For SFF (Small Form Factor) systems


Power supply (320W) - 89% efficiency - For Microtower PCs

AC power supply - 460W hot-plug, high-efficiency, common slot (Option 503296-B21)

146GB hot-plug dual-port SAS hard disk drive - 15,000 RPM, 6Gb/sec transfer rate, 2.5-inch small form factor (SFF), Enterprise


300GB hot-plug dual-port SAS hard disk drive - 15,000 RPM, 6Gb/sec transfer rate, 3.5-inch Large Form Factor (LFF), Enterprise


Battery (Primary) - 8-cell lithium-ion (Li-Ion), 63Wh, 2.2Ah - For use in models with 15.6-inch displays


600GB hot-plug dual-port SAS hard disk drive - 10,000 RPM, 6Gb/s transfer rate, 2.5-inch small form factor (SFF), Enterprise


Keyboard assembly - For use only with HP Compaq 6545b and 6540b computer models not equipped with a pointing stick - Includes cable (United States)

4GB, PC3-10600, DDR3-1333MHz, SODIMM 240-pins,non-ECC, unbuffered memory module

Battery (Primary) - 6-cell lithium-Ion (Li-Ion), 2.2Ah, 47Wh


Battery (Primary) - 6-cell lithium-Ion (Li-Ion), 2.55Ah, 55Wh


Battery (Primary) - 6-cell lithium-ion (Li-Ion), 2.2Ah, 47Wh

SPS-BASE ENCLOSURE


SPS-THERMAL MODULE DIS 35W


SPS-THERMAL MODULE DIS 45W


SPS-BASE ENCLOSURE

Keyboard assembly - For use on models with 39.6cm (15.6in) displays (United States)


SPS-THERMAL MODULE DIS

AC adaptor (90-watt) - Input voltage 110-240VAC, 50-60Hz - 18.5VDC output, 4.9A, 90 watts - Includes power factor correction (PFC) technology - Requires separate 3-wire AC power cord with C5 connector


AC adaptor (150-watt) - 110-240VAC input, 50/60Hz - 18.9VDC output - With power factor correction (PFC) technology - Requires separate 3-wire AC power cord with C5 connector

SPS-PSU ENT11 SFF 240W EPA90 12V 4OUTPUT


SPS-adaptor EPS ENT11 USDT 180W 87 19.5V

SPS-BASE ENCLOSURE ALUM

900GB hot-plug dual-port SAS hard disk drive - 10,000 RPM, 6Gb/sec transfer rate, 2.5-inch small form factor (SFF), Enterprise


3TB hot-plug dual-port SAS hard disk drive - 7,200 RPM, 6Gb/s transfer rate, 3.5-inch large form factor (LFF), midline


1TB hot-plug SATA hard disk drive - 7,200 RPM, 3Gb/sec transfer rate, 2.5-inch small form factor (SFF), Midline


SPS-BATT 6C 62WHr 2.8Ah LI CC06062-CL

2GB, 1333MHz, PC3-10600, CL9 128M x 8, DDR3-1333 Dual In-Line Memory Module (DIMM)

System Board DSC with HD6550/1G Graphics

SPS-BATT 9C 100WHr 3.0Ah LI CC09100-CL

SPS-DIMM 16GB 2RX4 PC3L-10600R


SPS-BATT 6C 47WHr 2.2Ah LI PR06047-CL

SPS-BATT 8C 73WHr 2.55Ah LI PR08073-CL

SPS-BATT 4C 41WHr 2.8Ah LI FN04041-PL

Keyboard TM - US

SPS-LCD HINGE KIT

SPS-FAN

SPS-BASE ENCLOSURE ALU

SPS-THERMAL MODULE DISC

SPS-LCD BACK COVER CHG

SPS-TOP COVER CHG

SPS-THERMAL MODULE DSC


SPS-UPGRADE BAY

SPS-120W PFC adaptor RC/V 3P SLIM

SPS-KEYBOARD - US

SPS-MEM 2GB PC3 12800 1600Mhz SHARED

1TB hot-plug dual-port SAS hard disk drive - 7,200 RPM, 6Gb/sec transfer rate, 3.5-inch large form factor (LFF), Midline, SmartDrive Carrier (SC) - Not for use in MSA products


SPS-DRV HD 146GB 6G SAS 15K 2.5 DP EN SC


450GB hot-plug dual-port SAS hard disk drive - 15,000 RPM, 6Gb/sec transfer rate, 3.5-inch large form factor (LFF), Enterprise, SmartDrive Carrier (SC) - Not for use in MSA products


600GB SAS hard disk drive - 15,000 RPM, 6Gb per second transfer rate, 3.5-inch large form factor (LFF), Enterprise, SmartDrive carrier (SC), hot-plug, dual-port (DP)


1TB hot-plug dual-port SAS hard disk drive - 7,200 RPM, 6Gb/sec transfer rate, 2.5-inch small form factor (SFF), Midline, SmartDrive Carrier (SC) - Not for use in MSA products


SPS-DRV HD 300GB 6G SAS 10K 2.5 DP EN SC


SPS-DRV HD 450GB 6G SAS 10K 2.5 DP EN SC


600GB hot-plug dual-port SAS hard disk drive - 10,000 RPM, 6Gb/sec transfer rate, 2.5-inch small form factor (SFF), Enterprise, SmartDrive Carrier (SC) - Not for use in MSA products


SPS-DRV HD 300GB 6G SAS 15K 2.5 DP EN SC


1TB hot-plug SATA hard disk drive - 7,200 RPM, 6Gb/sec transfer rate, 3.5-inch large form factor (LFF), Midline, SmartDrive Carrier (SC) - Not for use in MSA products


2TB hot-plug SATA hard disk drive - 7,200 RPM, 6Gb per second transfer rate, 3.5-inch large form factor (LFF), midline, SmartDrive carrier (SC) - Not for use in MSA products


SPS-DISPLAY BACK COVER IMR/CHA

SPS-BASE ENCLOSURE

SPS-DISPLAY BEZEL


SPS-PANEL RAW 11.6 BV SVA

SPS-THERMAL MODULE DSC

SPS-LCD BEZEL FOR WEBCAM ALU

SPS-THERMAL MODULE DSC VGA 2G


SPS-KEYBOARD BLK ISK/PT US

SPS-HINGE KIT

SPS-KEYBOARD BLK ISK/PT PAV BG1.0 US


SPS-LCD BACK COVER BE

SPS-FINGERPRINT MODULE

SPS-PNL RAW 14.0 HD BV LED SVA FLAT

SPS-THERMAL MODULE DSC

SPS-KEYBOARD BE ISK/PT/BL US

SPS-BATT 6C 62WHr 2.8AH LI MO06062-CL

SPS-LCD HU 13.3 HD BV LED

SPS-FAN


SPS-DSPLY BEZEL

SPS-DSPLY HINGE COVERS


SPS-DSPLY HINGES W/BRACKETS

SPS-DSPLY BACK COVER ALU

SPS-DSPLY SCREW

SPS- TOP COVER MBL/ALU

SPS-FAN

SPS-DSPLY RAW PANEL 15.6 LED BV HD

DC power cable - Connects power brick to notebook


SPS-DSPLY HINGES

SPS-DSPLY RAW PANEL 15.6 HD AG SVA

SPS-DSPLY BEZEL

SPS-DSPLY RAW PANEL 13.3 BV HD


Smart AC power adapter (65 watt) - Non-power factor correcting (NPFC) - Requires separate 3-wire AC power cord with C5 connector


AC Smart power adapter (90 watt) - 100-240VAC input, 47-63Hz - 19.0VDC output, 4.74A, 90 watts, with power factor correction (PFC) - Does NOT include power cord


SPS-90W PFC ADPTR SMART EM

AC adapter (65-watt) - 100-240V AC input, 19.5V, 3.33A DC output, RC/V, non-smart, with power factor correction (PFC) - (For use in all countries and regions)


Carriage belt - Drives the carriage assembly (24-inch)


24-inch rollfeed spindle rod assembly - Includes spindle, hubs, and end caps


Printhead carriage assembly - Includes carriage, bushings, pen latches, carriage position sensor, and line sensor

Carriage Belt - Drives the carriage assembly (42-inch)


Paper Pick-up roller assembly - Includes separation roller assembly, and holder cover

Pegasus Power Supply Assy ES

Belt and tensioner assembly - For Designjet printers

Belt and tensioner with metal with metal

ADF paper seperation pad assembly - Mounts in the center of the ADF separation pad frame assembly at the rear of the paper input tray

Carriage Belt - Drives the carriage assembly (24-inch)

Line sensor assembly - Includes holder and cable

Carriage (scan-axis) belt - For 44-inch printer series

Starwheel motor assembly - For Designjet priners

Lever lock - Left side upper lever lock for Black cartridge

Paper pickup roller - Includes the D shaped pickup roller spindle with the rubber tire - Does NOT include the idler rollers on each side of the pickup roller


Fussing assy 220v

SPS-DSPLY BACK COVER NEW

SPS-TOP COVER W/TP US NEW

SPS-20W ADPTR NPFC NSMART JAE-CONN


Smart travel AC adapter (65 watt) - Non-power factor correcting (NPFC) - Requires separate 3-wire AC power cord with C5 connector


SPS-40W NPFC ADPTR NS RA

SPS-TOUCH SCREEN

SPS-TOP COVER W/KB ISK PT US

SPS-BATT 4C 52WHr 3.55Ah LI BT04052XL-PL

SPS-PWR SPLY 65W TC12 EPS 87 EFF 19.5V

SPS- 65W n-S detachable cable


SPS-KB TM TP W8 US

SPS-KB ISK PT BLK W8 US

SPS-KB ISK PT BLK W8 US


SPS-DSPLY HU 15.6 HD BV ALU ENV

SPS-KB ISK STD BLK W8 US

SPS-TOP COVER W/TP NSV

SPS-KB ISK STD BL BLK CURVE US

SPS-TOP COVER

SPS-DSPLY BEZEL ENVY

SPS-90W PFC ADPTR S-3P 4.5MM

SPS-120W PFC ADPTR S-3P SLIM 4.5MM

SPS-65W ADPTR nPFC S-3P 4.5MM

SPS-DSPLY BACK COVER NSV

SPS-KB ISK STD TP BLK US

SPS-DSPLY HU 15.6 FHD BV TS

SPS-DSPLY HU 15.6 HD BV TS

4TB SAS Hard Drive Disk (HDD) - 7,200 RPM, 3.5-inch form factor, Dual-Port (DP), Midline (MDL), 6Gb per second Transfer Rate (TR)


HP 1.2TB 10K SAS 6G TR DP SC 2.5IN HARD DISK DRIVE


SPS-DIMM 8GB PC3-14900R 512Mx4 CL13

Keyboard with pointing stick (United States)

450GB dual-port hard disk drive - 15,000 RPM, 2/4 Gb/s transfer rate, Fibre Channel (FC) connector, 1.0-inch (2.54cm) form factor (part of AG803A and AG803B)

Battery (Primary) - 6-cell lithium-ion (Li-Ion), 4.4Ah


250GB hot-swap Serial ATA (SATA) hard drive - 7,200 RPM, 3.Gbps trasfer rate with Native Command Queing (NCQ), 3.5-inch form factor

Battery (Primary) - 8-cell lithium-ion (Li-Ion), 2.55Ah, 73Wh (Corlab)


450GB dual-port Modular Smart Array (MSA2) Serial Attached SCSI (SAS) hard disk drive - 15,000 RPM, 3.5-inch form factor

Keyboard assembly - 31.20mm (12.28in) keyboard with embedded numeric keypad (United States)

Power cord (Black) - 3-wire conductor, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C5 receptacle (Australia)

300GB hot-swap dual-port Serial Attached SCSI (SAS) hard drive - 10,000 RPM, 2.5-inch Small Form Factor (SFF)


8GB, PC3-10600R, DDR3-1333MHz RDIMM (Option 500662-B21)

146GB hot-swap dual-port Serial Attached SCSI (SAS) hard drive - 15,000 RPM, 3Gb/sec transfer rate, 2.5-inch Small Form Factor (SFF)


500GB hot-plug dual-port SAS hard disk drive - 7,200 RPM, 6Gb/sec transfer rate, 2.5-inch small form factor (SFF), Midline


500GB hot-plug SATA hard disk drive - 7,200 RPM, 3Gb/sec transfer rate, 2.5-inch small form factor (SFF), Midline


2TB hot-plug SATA hard disk drive - 7,200 RPM, 3Gb/sec transfer rate, 3.5-inch large form factor (LFF), Midline


AC power supply - 750W hot-plug, high-efficiency, common slot (Option 512327-B21)

4.0V Controller cache battery - 13.5Ahr

Fan module

Keyboard assembly - 25.7cm (10.1in) layout with Dura-Keys (United States)


Swing plate assembly - For tray 2 paper lift assembly - Located between the main gear assembly and the fuser, just above the power supply - Contains swing plate assembly and new fuser pressure release gear

Automatic document feeder (ADF) paper pick-up roller assembly

Paper pick-up roller assembly - For tray cassette 2 and 3 - Include separation pad for tray 2 and 3

4GB, PC3-10600, DDR3-1333MHz, 240-pins, non-ECC, unbuffered DIMM (Dual In-Line Memory Module)

Battery (Primary, XL) - 8-cell lithium-ion (Li-Ion), 68Wh


Power supply (135W) - With power factor correction (PFC)

Battery (Primary) - 9-cell lithium-ion (Li-Ion), 2.8Ah, 93Wh

Battery (Primary, XL) - 6-cell lithium-ion (Li-Ion), 2.55Ah, 51Wh, 1000-cycle

Battery (Primary, XL) - 6-cell lithium-ion (Li-Ion), 2.8Ah, 55Whr

Battery (Primary) - 6-cell lithium-ion (Li-Ion), 2.8Ah, 62Whr

Keyboard assembly - 11.97-inch keyboard with embedded numeric keypad (United States)

Battery (Primary) - 6-cell lithium-ion (Li-Ion), 2.8Ah, 62Wh

LCD panel cable kit - Wireless antenna (includes transceivers and cable), mebcam module cable, and LCD panel interface cable

Keyboard assembly - With integrated number pad and Clickpad - For on computers with 17.3-inch displays (United States)

300GB SAS hard drive - 15.000 RPM, 3.5-inch Small Form Factor (SFF)

603683-001

SPS-DC IN POWER CONNECTOR

SPS-230W PFC ADPTR SMART RC V 3W

Power supply (240 Watt) - Has a 85% efficiency rating

SPS-BD SYS DSC 5650/1G Qua W SUB

SPS-TOP COVER W/O FPR

3TB hot-plug SATA hard disk drive - 7,200 RPM, 3Gb/sec transfer rate, 3.5-inch large form factor (LFF), Midline


SPS-BATT 6C 55WHr2.8AhLI CC06055XL-CL XL

SPS-BATT 6C 55WHr 2.8Ah LI SX06055-CL XL

SPS-BATT 8C 75WHr 2.8Ah LI VH08075-CL XL

SPS-BD CNTRL INT EXT SAS SA P222 LP PCIe


SPS-BD CNTRL INT SAS SA P420 LP PCIe


SPS-BD DDR3 MINI DIMM MOD 184P 512MBx40


SPS-BD DDR3 MINI DIMM MOD 1Gx72


SPS-BD DDR3 MINI DIMM MOD 2Gx72


System Board DSC with 6570/1G QUA Graphics

SPS-BATT 9C 93WHr 2.8Ah LI PR09093-CL

THERMAL MODULE DSC

SPS-WLAN 802.11BGN INT HMC 2X2 RP2

SPS-LCD PNL RAW 12.5 HD AG LED SVA LVDS

Display Back cover - ALUM

SPS-MEM 4GB PC3 12800 1600Mhz SHARED

SPS-SPEAKERS

SPS-KEYBOARD W/O STICKPOINT 6460b-US

SPS-KEYBOARD TM US


SPS-BASE ENCLOSURE 13.3

SPS-LCM BEZEL W/ CAMERA 13.3

SPS-LCM HINGES

SPS-PNL RAW 15.6 HDAG LED SVALVDS NoWWAN

SPS-PSU ENT11 PFC 135W 87 EFF USDT

SPS-KYBD W/T PAD/PNT STK -US

System board - A60M DSC HD6470/1G

System board - A70M DSC HD6750/1G

SPS-BD SYS INTEL UMA

SPS-BASE ENCLOSURE

SPS-2ND HDD CRADLE

2TB hot-plug dual-port SAS hard disk drive - 7,200 RPM, 6Gb/sec transfer rate, 3.5-inch large form factor (LFF), Midline, SmartDrive Carrier (SC) - Not for use in MSA products


500GB hot-plug dual-port SAS hard disk drive - 7,200 RPM, 6Gb/sec transfer rate, 2.5-inch small form factor (SFF), Midline, SmartDrive Carrier (SC) - Not for use in MSA products


3TB hot-plug dual-port SAS hard disk drive - 7,200 RPM, 6Gb/sec transfer rate, 3.5-inch large form factor (LFF), Midline, SmartDrive Carrier (SC) - Not for use in MSA products


900GB hot-plug dual-port SAS hard disk drive - 10,000 RPM, 6Gb/sec transfer rate, 2.5-inch small form factor (SFF), Enterprise, SmartDrive Carrier (SC) - Not for use in MSA products


500GB hot-plug SATA hard disk drive - 7,200 RPM, 6Gb/sec transfer rate, 2.5-inch small form factor (SFF), Midline, SmartDrive Carrier (SC)


1TB hot-plug SATA hard disk drive - 7,200 RPM, 6Gb/sec transfer rate, 2.5-inch small form factor (SFF), Midline, SmartDrive Carrier (SC) - Not for use in MSA products


SPS-CA CAPACITOR 36in FL


SPS-BEZEL UPGRADE BAY 15/17W

SPS-PSU 270W Soave-B (Active PFC)

SPS-PCA SYS BD HM65 DSC HD6770/2G QUA U3

SPS-TOP COVER W/ TOUCHPAD ALU DUB

SPS-CVR TOP W/ FP SILV 13.3 NO USB LOGO

SPS- POWER IN CONNECTOR

SPS-FAN UMA

SPS-ASSY CARRIER 2.5 HDD to 3.5 HDD


SPS-HEATSINK DSC

SPS-DSPLY CABLE

SPS-DSPLY BEZEL ALU


SPS-DSPLY HU 15.6 HD AG W/CAM

SPS-DSPLY HU 13.3 HDAG SVA LVDS Flat

SPS-THERMAL MODULE UMA

SPS-PNL RAW 12.5 HD AG

SPS-DSPLY BACK COVER LNW

SPS-TOP COVER W/TP LNW

SPS-BATT 4C 45WHr 3.05Ah LI HD04045XL-PL

SPS-BASE ENCLOSURE RUBY RED

SPS- TOP COVER MBL/ALU

SPS-THERMAL MODULE UMA

SPS-DSPLY RAW PANEL 15.6 HD AG LED - 6U

SPS-P/S 85W TC12 EPS 87 EFF 19.5V


SPS-BASE ENCLOSURE

SPS-FAN

SPS-120W PFC adaptor SMART SLIM

SPS-KB ISK STD TP BLK US

SVC-ASSY-DOUBLE DECKER SPITTOON

Carriage drive belt kit - Includes belt and oil

Ink Tube System - Includes setup printheads, ink collector, carrier clip, nye oil, ink supply station housing foam

Carriage trailing cable kit - Includes cable, trailing cable clip, nye oil, cover cap, trailing cable ferrite, ferrite holder

Carriage assembly trailing cable kit - Includes installation instructions, trailing cables, two mounting clips, and a ferrite - Cables are 1.4m (4.7ft) long with 30 pin (M) edge connectors - For 24-inch models

Service station - Includes wipers, pen caps, and the right hand spittoon - Installed in right side of printer

Cutter assembly

Encoder strip (42-inch)

Carriage assembly trailing cable kit - Includes installation instructions, trailing cables, mounting clips, and a ferrite - Cables have 30-pin (M) edge connectors - 2.0m (6.5ft) long - For 42-inch models

Replacement gear kit - Includes 17,17,19 and 20 tooth gears

ADF input tray - Automatic document feeder input support

Toner collection unit - Waste toner box - Collects the excess of toner

Electrostatic transfer belt (ETB) assembly - Includes 2nd transfer roller assembly and the intermediate transfer belt assembly

Intermediate transfer belt kit - Includes ITB, and roller

ADF roller assembly - Includes ADF separation pad assembly

Maintenance kit - For 220 VAC - Includes separation pad for the 500-sheet cassette, tray 1 pick-up roller, tray 1 separation pad, pick-up and feed rollers for the 500-sheet cassette, transfer roller, and fuser for 220 VAC operation

ADF paper seperation pad assembly - Mounts in the center of the ADF separation pad frame assembly at the rear part of the paper input tray

ADF paper pickup roller assembly - Includes the pickup roller, separation roller, and drive gear mounted in a frame - Mounts on the bottom of the ADF cover assembly (above the input paper tray)

ADF mylar replacement kit - Includes three clear mylar replacement strips for the ADF guide - Mounts in the ADF mylar holder assembly

ADF roller replacement kit - Includes pick roller assembly, seperation pad with Mylar strip attached, and wordless installation guide - For HP Scanjet N9120 document flatbed scanner

Carriage belt - Long belt attached to the carriage (For the 42-inch wide version plotter)

Laser/scanner assembly kit

Secondary transfer assembly - Located at bottom of the intermediate transfer belt (ITB) assembly

TRAY 2 PICK-UP,FEED ROLLER KIT

Belt tensioner assembly - Keeps carriage belt tight

Carriage rear bushing

Cutter assembly - Auto cutter for rollfeed paper

Scan Axis Motor SV

ADF maintenance kit - Includes the ADF paper pick-up roller assembly, separation pad assembly, and three clear mylar replacement strips

ADF paper input tray - Holds the paper before is printed - Includes the adjustable width guides

Service station assembly - Includes the drop detector, aerosol fan assembly, primer assembly, and service station spittoon - For the Designjet T1100/T610 printer series

512MB, 167MHz, 200-pin DDR DIMM

Separation pad for multipurpose/tray 1 assembly

Feed/separation roller - Has a blue gear on one end and blue release tab on the other - For tray 2 or tray 3

Pick-up roller assembly - Picks paper from paper input tray - For tray 2 and 3

Maintenance kit (220 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 220 VAC operation, gloves, tool (hook), and an instructions guide

ADF maintenance kit - Includes the ADF paper pickup roller assembly and the separation pad assembly

Lock lever - This is the left side lock for the three color cartridges

Left slide cam - Small plastic cam that moves inside left side door rod link

Paper pick-up assembly - For paper input tray 4

Paper pick-up roller - For the 1 x 500-sheet and 3 x 500-sheet paper input tray

Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24-tooth white gear on one side


Separation pad assembly - Includes the pad and spring located on the arm in the holder frame - Mounts toward the front of the tray 2

Electrostatic Tranfer Belt (ETB) assembly - Includes the assembly structure, ETB belt, drive roller and drive motor M5 - Wide belt assembly which feeds the paper past each toner cartridge - Simplex model only

Fusing assembly - For 220 VAC to 240 VAC operation - Bonds toner to paper with heat

Fusing assembly - For 220 VAC to 240 VAC- Bonds toner to paper with heat

Fuser one way gear assembly

Fusing assembly - For 110-127 VAC - Bonds toner to paper by heat - Includes 20-tooth gear

Tray 1 and 2 separation pad and holder assembly

250-sheet paper input tray 2 cassette - Pull out cassette that paper is loaded into

Paper pickup roller (D-shaped roller) - Picks up media from the paper input tray

CASSETTE

Fusing drive assembly - Include fusing motor (M2)

Tray 2 paper pick-up assembly - Use for duplex models only

Tray 2 paper pick-up assembly - Use for simplex models only

Face down top output bin delivery roller assembly - Includes all rollers and shaft in assembly

Separation pad assembly - Includes pad holder and separation pad - For tray 2

TRAY2/TRAY3 PAPER PICK-UP ROLLER ASSY

73-tooth gear - Located on the gear plate

52/96 tooth gear - Have 52-tooth on the inside and 96-tooth on the outside - Located on the gear plate

40/99 tooth gear - Have 40-tooth on the inside and 99-tooth on the outside - Located on the gear plate

Photo-interrupter sensor assembly (Does not include the sensor flag)

SPS-DSPLY HU 14 HD TS DA/MIC BLK ENV

SPS-DISPLAY PANEL KIT

SPS-adaptor DUCK HEAD-AUST

CST. PICK-UP ROLLER ASSY

SPS-MB UMA A70M W8STD

SPS-10W adaptor WALL MOUNT RC/V 3W

SPS-KB ISK/PT NSV W8 US

SPS-KBD ISK/PT BLK W8 US

SPS-HP ElitePad USB adaptor

SPS-45W NPFC ADPTR SMART RC/V

SPS-KB ISK PT WHT W8 US

SPS-KB ISK PT BL W8 US

SPS-DC-IN POWER CONNECTOR

SPS-DSPLY RAW PANEL 15.6 LED BV HD SVA

ADF Roller kit 60K/Maint

SPS-DSPLY RAW PANEL 15.6 HD SVA AG

SPS- DRV MSA 900GB 6G SAS 10k 2.5 SFF

SPS-DSPLY HU 15.6 HD MIC MBL/MBL ENV

4TB hot-plug SATA hard disk drive - 7,200 RPM, 6Gb per second transfer rate, 3.5-inch large form factor (LFF), midline (MDL), SmartDrive carrier (SC)


SPS-HARDWARE KIT

SPS-BATT 3C 50WHr 4.5AH LI CM03050XL-PL

220V Fuser

SPS-45W ADPTR NFPC SMART RC 4.5mm PREM

SPS-45W ADPTR NFPC SMART RC 4.5mm PREM

SPS-DRV HD 1.2TB 6G SAS 10K 2.5 DP SC

Power supply (50W) - 3-wire, 110-240VAC input, 50/60 Hz - 32VDC output, 1560 mAh

Power supply (800 Watt) redundant hot plug - Includes two auxiliary power dongles for PCI Express graphics card (North America)


NVIDIA Quadro FX 1500 256MB PCIe graphics board - With dual 400MHz RAMDAC (Random Access Memory Digital-to-Analog Converter)


146GB hot-plug Serial Attached SCSI (SAS) hard disk drive - 10,000 RPM, 2.5-inch form factor


Power supply(365W) - Input voltage 100-240VAC, 50/60Hz - Includes cable assembly

72GB hot-plug SAS hard drive - 15,000 RPM, 6GB transfer rate, 2.5-inch small form factor, dual-port


Optical drive bay filler blank


Battery (Primary) - 6-cell lithium-ion (Li-Ion), 3.0Ah, 66Whr

SPS-DRV,HD 250GB 3.5" NHP SATA

Battery (Primary) - 4-cell lithium-ion (Li-Ion), 2.8Ah, 41Wh

Battery (Primary) - 8-cell lithium-ion (Li-Ion), 2.55Ah, 73Wh - For use in models with 17.3-inch displays

Battery (Primary) - 9-cell lithium-ion (Li-Ion), 2.8Ah, 93Whr

External power adaptor (120 Watt) - Requires separate power cord

Upper CPU cover (chassis top) - Includes TouchPad board and capacitive board

603651-001


Pen - Includes tether

SPS-KEYBOARD TP 14.0 - US

SPS-PSU ENT11 CMT 320W STD 12V 4 OUTPUT

SPS-FAN ENHANCED

AC power adaptor (90-watt)

300GB Serial Attached SCSI (SAS) hard drive - 15,000 RPM, 3.5-inch form factor

Base whole unit replacement for t5740e Thin Client - With Intel Atom processor N280, Windows 7 Embedded Standard, 4GB 44-pin IDE flash memory, and 2GB PC3-10600Mhz CL=9 SODIMM memory

1GB, 1333MHz, PC3-10600, CL9 128M x 8, DDR3-1333 Dual In-Line Memory Module (DIMM)

SPS-BATT 6C 62WHr 2.8Ah LI SX06062-CL

SPS-Heatsink Z820


Battery - 9-cell 100Wh 3.0Ah MUO9100-CL

Front I/O cable assembly - With power on/off switch

SPS-BASE ENCLOSURE

SPS-LCD CABLE KIT

SPS-TOUCHPAD BUTTON BOARD W/CABLE

SPS-BASE ENCLOSURE 6460b

SPS-HDD HARDWARE KIT


SPS-200W PFC adaptor RC/V 3P SLIM

SPS-LCM BACK COVER SILVER 13.3

SPS-WLAN ANTENNA

SPS-LCM HINGE COVER

SPS-PLASTIC KIT

4GB, 1333MHz, PC3-10600 DDR3-1333 CL=9 Dual In-Line Memory Module (DIMM)

SPS-PNL DSPLY 13.3 HD AG W/CAM SILVER

SPS-LCD PNL RAW 15.6 HD BV LED LVDS
Please Note: This LCD is a raw panel part and may not include the plastic bezel, hinge, microphone, webcam etc.

SPS-BATT 6C 55WHr 2.8Ah LI PR06055XL

SPS-HDD UPGRADE BAY

SPS-DRV HD 500GB 3.5 7.2K 6G MDL SC SATA


SPS-DISPLAY CABLE

SPS-THERMAL MODULE DISC VGA 2G

SPS-PANEL 15.6 RAW LED HD BV W/ BEZEL AL
Please Note: This LCD is a raw panel part and may not include the plastic bezel, hinge, microphone, webcam etc.

SPS-PCA SYSTEM BD DSC 6490/1GB

SPS-DSPLY RAW PANEL 15.6 LED HD BV

SPS-TOP COVER W/TP MBL

SPS-MB DSC 630M/2G 45W

SPS-THERMAL MODULE DSC

SPS-DSPLY BEZEL WEBCAM 13.3

SPS-TOP COVER W/FINGERPRINT RDR

SPS-P/S 65W TC12 EPS 87 EFF 19.5V


SPS-DSPLY CABLE

SPS-SCREW

SPS-BATT 4C 37WHr 2.55AH LI VK04037-CL

SVC KIT-INK CLEANUP

Encoder strip (24-inch)

ADF feed roller assembly - Mounts in center of the ADF chassis - Includes gear, shaft, and clutch parts


Mckinley ADF Single Pack

Kit-formatter replacement 04.0

Multi-purpose/tray 1 kit - Contains a pickup roller, a feed roller, and a separation roller

Scarlet ADF Single Pack

Fuser assembly - For 220 VAC - Bonds toner to paper with heat

Formatter (main logic) board - For the LaserJet P2055dn/P2055x printers only

Tray 1 Roller Kit

ADF - SEPERATION ROLLER ASSEMBLY

Spindle hub

Encoder strip and sensor kit - For 60-inch plotters

Synthetic oil for carria 100ML

sRoller Replacement Kit 100 (A

Fluorescent lamp - To illuminate documents for scanning

Cartridge lock kit - Used to replace all four locks at one time

Lubrication felts kit - For Designjet printers

3-inch spindle adaptor kit

Take-up reel spindle hubs

Feed roller high capacity input (HCI) - Transmit the paper from the cassette and feeds it to the device entrance (blue)

Multi-purpose/tray 1 separation pad - Does not include holder

Lever slide lock - Slide that locks and unlocks the individual levers on the left side

RIGHT LOCK SLIDE LEVER

Right slide cam ? Cam that actuates the cartridge levers and locks

Front fuser rail

TRAY 2 ROLLER

Paper pick-up and feed roller assembly - Rubber roller with drive gear

SOLENOID

Tray 1 pickup roller - D-shaped roller located under the envelope cover

Pickup roller - Tray 2 paper pickup roller

Paper pickup roller - Picks up media from the paper input tray

Multipurpose paper input tray separation pad

Multipurpose paper input tray pick-up roller

CASSETTE REAR ASSY

Transfer roller assembly - Long metal shaft with black roller - Includes right side bushing and tension spring

500-sheet paper tray/cassette - This is only the tray, does not include feeder or frame that tray goes into

Fuser drive assembly - Includes the two support plates, drive gears, and motor (M2)

Lifter-drive-assembly

Drum motor (M15) assembly - Drives the photosensitive drum and the primary charging roller in the black imaging drum

Fusing assembly - For 220 VAC to 240 VAC - Bonds toner to paper with heat - Includes 20-tooth gear

Fusing Assembly - For 220-240 VAC - Bonds toner to paper with heat

Fusing Assembly - Bonds toner to paper with heat - For 220-240VAC (+/- 10%) operation

Separation roller assembly

REGISTRATION ASSY

LEFT PAPER DELIVERY TRAY ASSY

Separation pad holder assembly - For the 500-sheet paper input tray 2

Fusing Assembly - Bonds toner to paper with heat - For 220-240VAC (+/- 10%) operation

Paper pickup roller assembly - For the LaserJet P2035/P2055 printer series

Rear cover assembly - For the LaserJet P2055 printer series

43-tooth gear - Located on the gear plate

26-tooth gear - Located on the gear plate - Snaps in to the 43-tooth gear

SPS-200W PFC adaptor SMART SLIM


SPS-MB DSC HM77 7670M/2G W8STD

SPS-KB ISK/PT BLK W8 US

SPS-P/S 36W Zero Client EPS 82 EFF 12V


SPS-BASE ENCLOSURE W8

SPS-Cable Mini Dp tp Dp adaptor

SPS-DSPLY HU 15.6 HD BV ALU DSC ENV

SPS-USB Kybd JB Win8 AP-INTL

SPS-KEYBOARD 17.3 W8-US

Kit-CE878A PCA replace 52,071,4 Rohs2.04

Kit-LJ M5035 MFP Fter 48,171,5 Rohs2.04

1.2TB hot-plug dual-port SAS hard disk drive - 10,000 RPM, 6Gb/sec transfer rate, 2.5-inch small form factor (SFF), Enterprise


SPS-BATT 6C 47WHr 2.2AH LI PI06047-CL

SPS-KB ISK STD TP WHT US

SPS-KEYBOARD W/ POINT STICK-US

SPS-KEYBOARD W/ POINT STICK-US

SPS- HEAT SINIK


SPS-MEM 4GB 1600MHz 1.35v DDR3L SSS

Battery pack (primary) - 6-cell Lithium-Ion (Li-Ion), 2.2Ah, 47Wh


Battery (Primary) - 6-cell lithium-ion (Li-Ion), 47Wh


AC adaptor (90-watt) - Input voltage 110-240VAC - With power factor correction (PFC) technology - Requires separate 3-wire AC power cord with C5 connector

SPS-TOP COVER W/ FPR W/ TOUCH PAD

SPS-DSPLY BACK COVER BLK-BLK

SMK3 a?? Aerosol Fan with Filt

POWER SUPPLY ROHS SV

Keys - For door of Rack 9000 series and Rack 10000 series except Rack S10614 - Includes two keys


HP SMART TRAVEL adaptor 65W REQUIRES SEPERATE CORD TO CONNECT adaptor TO MACHINE AND POWER CORD (687530-001 or 696075-001 or 613862-001)

AC power adaptor (65-watt) - Rated output current (maximum) 3.42A and output voltage +19VDC


SPS-PCA SYSTEM BOARD UMA MDM CR

AC adaptor (65-watt) - Does NOT include power cord


AC adaptor (65 watt) - Input voltage 110-240VAC, 50-60Hz, 2.4A - 18.5VDC output voltage - Requires a separate 3-wire AC power cord with C5 connector


SPS- DIMM 32GB 4RX4 PC3L-8500R


SPS-TOP COVER W/TP US

Power cord (Black) - 17 AWG, 3-wire, 2.5m (8.2ft) long - Has straight (F) C15 receptacle with a `U` shaped channel above the ground pin to prevent use of a lower rated power cord (For 240VAC in Australia and China)

Jumper cable - 200-240VAC, 10A, with straight C14 connector to straight C15 connector - 1.0m (39.3in) long (EMEA)

JUMPER CABLE 2.5M,C14-C15,EMEA

Carriage belt (D-size) - Long/wide belt attached to the carriage


Pincharm lift mechanism - Includes cam (a long bar) , cam bushings, pincharm lever, pincharm lever bushing

Drive roller encoder sensor

Power supply assembly - Includes power switch

Pincharm lift mechanism - Includes cam (a long bar) , cam bushings, pinch arm lever, pinch arm lever bushing

Formatter PC board assembly - For the LaserJet M2727 series

Automatic document feeder (ADF) input tray

Fusing Assembly - Bonds toner to paper with heat - For 220VAC to 240VAC (+/- 10%) operation - Mounts in the upper front of the printer

MULTI-PURPOSE PICK-UP ASSY

Odyssey Network formatter

SPS-ASSY Cable DP with AUX-N pull-up

1 Pricing and availability is based on stock quantities at the time of order.
2 Pricing quoted is for phone/fax ordering only.
3 Pricing quoted is for online ordering only.
4 HP Recommended Retail Price based on HP Outright List Price.
5 Recommended Retail Price.